Influence of particle contact models on soil response of poorly graded sand during cavity expansion in discrete element simulation

The discrete element method (DEM) has been extensively adopted to investigate many complex geotechnical related problems due to its capability to incorporate the discontinuous nature of granular materials. In particular, when simulating large deformations or distortion of soil (e.g. cavity expansion), DEM can be very effective as other numerical solutions may experience convergence problems. Cavity expansion theory has widespread applications in geotechnical engineering, particularly to the problems concerning in situ testing, pile installation and so forth. In addition, the behaviour of geomaterials in a macro-level is utterly determined by microscopic properties, highlighting the importance of contact models. Despite the fact that there are numerous contact models proposed to mimic the realistic behaviour of granular materials, there are lack of studies on the effects of these contact models on the soil response. Hence, in this study, a series of three-dimensional numerical simulations with different contact constitutive models was conducted to simulate the response of sandy soils during cylindrical cavity expansion. In this numerical investigation, three contact models, i.e. linear contact model, rolling resistance contact model, and Hertz contact model, are considered. It should be noted that the former two models are linear based models, providing linearly elastic and frictional plasticity behaviours, whereas the latter one consists of nonlinear formulation based on an approximation of the theory of Mindlin and Deresiewicz. To examine the effects of these contact models, several cylindrical cavities were created and expanded gradually from an initial radius of 0.055 m to a final radius of 0.1 m. The numerical predictions confirm that the calibrated contact models produced similar results regarding the variations of cavity pressure, radial stress, deviatoric stress, volumetric strain, as well as the soil radial displacement. However, the linear contact model may result in inaccurate predictions when highly angular soil particles are involved. In addition, considering the excessive soil displacement induced by the pile installation (i.e. cavity expansion), a minimum distance of 11a (a is the cavity radius) is recommend for practicing engineers to avoid the potential damages to the existing piles and adjacent structures.     

Simulation of producer gas flameless combustion with fresh reactant diluted by hot flue gas

Flameless combustion is considered as a flexible and efficient combustion process for low heating value gas fuel. This paper presents numerical simulations of premixed flameless combustion using producer gas as a fuel. Different initial conditions of the premixed fresh reactant (air/fuel mixture) and dilution levels are taken into account for the investigation. The numerical simulations were investigated using a network of chemical reactor models with the detailed reaction mechanism of GRI‐Mech 3.0. A threshold dilution level for flameless combustion fuelled by producer gas was determined. The numerical results show that dilution of the fresh reactant with hot combustion products and initial fresh reactant temperature play important roles in flameless combustion formation and its auto‐ignition behaviour, rather than equivalence ratio of the fresh reactant. In the flameless combustion regime, temperature and chemical concentrations were reduced while chemical kinetics process was decelerated, resulting in delay of the auto‐ignition process.     

增材制造技术在超高膨胀封隔器中的应用

石油和天然气行业不断关注增材制造技术在航空航天和汽车行业的应用发展。研发了利用增材制造技术的超高膨胀封隔器,该封隔器的支承环系统由增材制造。增材制造设计大幅减少了支承系统的构件数量,同时显著提高了膨胀能力和额定压力。密封元件系统与增材制造支承环安装在一起,提供了极端膨胀比、零挤压间隙和对不规则孔的良好适应性。分析和测试结果表明:直径膨胀比高达111%,与常规封隔器相比,提高50%以上; 至少涵盖5种线重的套管(外径相同); 在148.89 ℃的温度下,密封元件能够保持压力68.95 MPa。介绍了增材制造技术、增材制造支承环概念、增材制造材料力学性能、密封元件系统优化和测试情况,以期给我国的完井作业提供借鉴。     

机电控制无级变速器执行机构动态响应特性仿真研究

为研究夹紧力可调的机电控制无级变速器（EMCVT）电控电动执行机构的可靠性，及其速比和从动带轮夹紧力动态响应的影响因素，采用MATLAB/Simulink构建了EMCVT执行机构的动力学模型，设计了针对EMCVT电控电动执行机构的速比和夹紧力闭环控制器。对EMCVT输入转矩突变和目标速比突变两种工况进行了仿真分析，仿真结果表明：速比和从动带轮夹紧力动态响应的超调量和调节时间满足CVT的使用要求，从动带轮夹紧力响应时间小于1s，速比变化率可以达到2；EMCVT速比和从动带轮夹紧力动态响应的主要影响因素是执行电动机的负载和转动方向。     

Stability and thermophysical properties of fly ash nanofluid for heat transfer applications

Improving the performance of heat transfer fluids is altogether significant. The best approach for improving the thermal conductivity is the addition of nanoparticles to the base fluid. In the present study, specific heat, dynamic viscosity, and thermal conductivity of water-based Indian coal fly ash stable nanofluid for 0.1% to 0.5% volume concentration in the temperature range of 30 to 60°C has been investigated. To evaluate an average particle diameter of 11.5 nm, the fly ash nanoparticles were characterized with scanning electron microscopy and dynamic light scattering. Using zeta potential, the stability of nanofluid in the presence of surfactant Triton X-100 was tested. Thermal conductivity and viscosity of fly ash nanofluid increased, while specific heat decreased as volume concentration increased. The effect of temperature on the fly ash nanofluid was directly proportional to its thermal conductivity and specific heat and inversely proportional to viscosity.     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。     

Photoluminescence and temperature sensing of lanthanide Eu3+ and transition metal Mn4+ dual-doped antimoniate phosphor through site-beneficial occupation

For a long time, rare-earth ion-doped phosphors have been widely used in temperature sensing because of their excellent light-emitting properties. However, most of the rare earth elements are relatively rare and expensive, so the transition group elements that are economical and easy to obtain have been favored by researchers. This paper presents a new type of phosphor doped with rare earth ion and transition metal for optical temperature measurement. In recent years, Mn⁴⁺-doped phosphors have attracted wide attention because of their strong deep red light-emitting properties. La₂LiSbO₆ provides a good host environment for Mn⁴⁺ and Eu³⁺ due to its unique crystal structure. In this paper, a series of La₂LiSbO₆ phosphors singly doped with Mn⁴⁺ and Eu³⁺, and co-doped with Eu³⁺/Mn⁴⁺ were synthesized. The crystal phases and optical properties of these materials were characterized and analyzed in detail. We specifically studied the temperature dependence of the fluorescence intensity of the optimized La₂LiSbO₆: Eu³⁺, Mn⁴⁺ phosphors at 303K–523K. The experimental results prove that the thermal responses of Mn⁴⁺ and Eu³⁺ are different. With increasing temperature, the thermal quenching of the Mn⁴⁺ fluorescence intensity is much faster than that of Eu³⁺, so the temperature characteristics can be explored by the fluorescence intensity ratio (FIR) of Eu³⁺ to Mn⁴⁺. At 523 K, its maximum relative sensitivity and maximum absolute sensitivity can reach 0.891% K⁻¹ and 0.000264 K^-1, respectively. Our experimental analysis shows that La₂LiSbO₆:Eu³⁺/Mn⁴⁺ phosphors have relatively high temperature sensitivity and have potential application prospects in the field of high temperature sensing.     

Study on chaotic oscillator-based algorithm for weak GLONASS signal acquisition

According to the characteristics of the chaotic oscillator in detecting weak signals, an algorithm based on Duffing chaotic oscillator array was proposed for acquisition of weak GLONASS signals. By means of GLONASS intermediate frequency and Duffing chaotic oscillator models, Lyapunov exponent is adopted to judge the critical condition of phase track and decide whether GLONASS signals exist or not by the change of the critical condition, and numeric iteration procedure is used to calculate the exponent. Finally, the performance of algorithm is simulated using GLONASS intermediate frequency data. The results indicate that acquisition algorithm can satisfy the need of object positioning in low signal-to-noise ratio environment.     

采动覆岩卸荷膨胀累积效应

地下煤层开采引起的岩层运动是一系列安全和环境问题的根源,研究采动岩层运动规律是安全、高效、绿色开采的重要基础。通过对岩层运动过程的研究,揭示了采动覆岩卸荷膨胀累积效应及其对岩层运动规律的影响机制。研究表明:采动覆岩经历了卸荷膨胀与再压实的动态过程。受关键层结构控制,上覆岩层由下向上成组破断运动,关键层破断前,阻断了上覆载荷向下方岩层的传递,导致其因卸荷而产生膨胀,包括碎胀与弹性膨胀。随着关键层破断高度增加,覆岩卸荷高度同步增大,因卸荷而膨胀的岩层总厚度不断增大;同时卸荷煤岩也受到已破断关键层载荷的压实作用,从而造成覆岩卸荷膨胀总量的不断变化。将这种覆岩卸荷膨胀总量随覆岩卸荷高度动态变化的现象定义为采动覆岩卸荷膨胀累积效应,进而建立了理论模型,并通过淮北海孜煤矿巨厚火成岩下采煤覆岩裂隙实测进行了验证。结果表明,采动覆岩卸荷膨胀累积效应对采动岩层运动规律产生了重要影响,如影响覆岩关键层下离层量,影响覆岩关键层贯通破断的高度,影响不同开采条件的地表下沉系数等。采动覆岩卸荷膨胀累积效应改变了对离层存在形式的传统认识,该效应的存在导致关键层下最大离层量一般小于采高的10%,覆岩可注浆充填空间并非传统认识上的“离层区”,而主要是注浆充填压力“压实”作用下将覆岩卸荷累积膨胀所转化出的那部分空间,该发现指导了覆岩隔离注浆充填绿色开采技术的创新研发及其在建筑物压煤开采中的成功实践。     

伞帽用高铬铸铁在热强碱腐蚀环境下的磨损分析

针对氧化铝行业中常用的Cr28和Cr20高铬铸铁伞帽在相同工况条件下的磨损机理进行分析,并对比研究了实际生产中两种失效材料的成分、组织及性能。结果表明,伞帽部件在高温强碱腐蚀条件下受到外界冲刷时,磨损量由微切削磨损与变形磨损这两种机制共同决定。含铬量较高的Cr28高铬铸铁,其冲刷和抗腐蚀磨损性能均优于Cr20高铬铸铁。伞帽服役寿命主要受浆料和表层的铸铁材料两大因素影响。两种试验材料经淬火+回火处理后,基体组织中主要为回火马氏体+M₇C₃型碳化物+少量残留奥氏体,其中含铬量较高的Cr28高铬铸铁中共晶碳化物含量更高,且分布更加弥散,其平均硬度值为64.0 HRC,高于Cr20高铬铸铁的60.2 HRC。最终确定Cr28高铬铸铁作为伞帽材质更能满足氧化铝生产及设备检修周期的需要。